Dock Cleat- 8"- Shipping will be added to Final Invoice on this product
$4.10
ace mooring hardwareACEDC-8
Dock Cleat, 8"
Galvinized Steel
Dock Cleat, 10"- Shipping will be added to Final Invoice on this product
$6.75
ace mooring hardwareACEDC-8
Dock Cleat, 10"
Galvinized Steel
Rub Rail- 8' Sect Heavy Duty White Only- Shipping will be added to Final Invoice on this part
$15.99
ace mooring hardwareACERR-B
White Vinyl Rub Rail
Extruded
RUBRAIL to protect edge of dock. This
section is designed to extend over the top edge of
the member that it is attached. This part is molded
with a center support wall for extra impact.
Sold as 8' sections only. Price is your cost per section.
A $5.00 open case charge will be added to your order for quantities less than 10 sections.
Rub Rail- 8' Sect Light Duty White Only- Shipping will be added to Final Invoice on this part
$11.95
ace mooring hardwareACERR-C
White Vinyl Rub Rail
Extruded
RUBRAIL to protect edge of dock. This
section is designed to be flush mounted. This part
is molded with a "C" section and is sutable for light
applicatons.
Sold as 8' sections only. Price is your cost per section. A $5.00 open case charge will be added for orders less than 160'.
Dock Defender 2700- 1.68" Dia post- Free Shipping on orders of two or more!
$87.99
Dock Defender Model 2700- 1.68 Dia Post-
The Standard 2700 model provides impact protection for
boat up to 24' moored in calm or choppy waters. The 2700
features 27"L x 8.5" Dia premium vinyl fenders and all
necessary mounting hardware and fasteners.
Price is per each kit.Free shipping on orders of two or more.
Manufactured in USA.
Hydrometer
$23.95
Hydrometer- Measures Specific Gravity
Manifold- 8 Volt 2.3 inch cell spacing- Black
$4.50
Maifold- replacement manifold for standard 2.3 inch cell
spacing. Sonic welded plastic molded manifold with "O"
ring seals for Swivel "T" and valve connection ports.
Manifold- 6 Volt 2.7 Cell Spacing Black/Blue
$4.50
Maifold- replacement manifold for standard 2.7 inch cell
spacing. Sonic welded plastic molded manifold with "O"
ring seals for valve connection ports.
Manifold- 8 Volt x 2.5 Inch Cell Spacing- Black/Red
$4.50
Maifold- replacement manifold for standard 2.5 inch cell
spacing. Sonic welded plastic molded manifold with "O"
ring seals for Swivel "T" and valve connection ports.
Manifold- 6 Volt x 3.3 Cell Spacing- Black/White
$4.50
Maifold- replacement manifold for standard 3.3 inch cell
spacing. Sonic welded plastic molded manifold with "O"
ring seals for Swivel "T" and valve connection ports.
Clampless Swivel "T" with "O" Ring
$2.00
Clampless Swivel "T"- Plastic molded swivel "T" that is
press fit into head of valve body and manifold to allow
easy routing of tubing. Compete with new "O" ring.
Use to repair leaking or damaged swivel "T's".
BA-MS-341 Niagara Replacment Cartridge- Shipping added to final invoice
$139.95
Replacment Cartridge for Niagara BA-MS-341.
16# for calculating shipping ground
Watering Cart- 12VDC W/ Built In Charger
$825.00
Amazon Cart Does NOT Support Freight Shipping. Please Checkout through the JanWP.com cart and we will contact you with shipping costs.
12 Volt DC Water Cart- 22 gallon capacity,
includes sealed battery and on board battery
charger.
Watering Cart- 120V AC Power Required
$750.00
Amazon Cart Does NOT Support Freight Shipping. Please Checkout through the JanWP.com cart and we will contact you with shipping costs.
BA-MS-205 AC Battery Watering Cart-
22 gallon capacity,20 foot cord,
requires 120 volt AC power supply.
6V Regulated Hose Supply- W/O Hose or Strainer
$65.00
Regulated Hose Supply- Pressure regulated water supply that
connects to a standard water hose. Same part as BA-MS-320-20
without 20' hose
Visual port that allows you to see that water is flowing.
When balls stop rotating battery watering is complete
Regulated Hose Supply- Pressure regulated water supply that
connects to a standard water spiket. Includes 20 foot of
hose and strainer on connector end.
Visual port that allows you to see that water is flowing.
When balls stop rotating battery watering is complete.
Deionized Water Supply- Filter Tap Water
$499.95
Deionized Water SupplyDeionized Water Supply
Maximizes
battery life by removing dissolved solids that are present in tap water
and can lead to shortened battery life. Economical,
the mixed bed deionizer uses an ion exchange cartridge filled with
non-toxic synthetic resins to remove impurities from you tap water
before it enters the battery.
Red / Green water
quality light lets you know when cartridges need to be replaced. Requires 110V-115V AC outlet.
Mounting bracket has
built in hose storage bracket
20 foot supply hose
Cartridges can be
discarded when replacement is necessary
Treats up to 600
gallons of water per cartridge before refill is necessary
Our 110
VAC powered portable water supply is constructed of a rugged 14 gauge
steel and can be hand carried anywhere for maximum portability or
mounted to a battery changer or wall for those who want a powerful
pumping unit in a small package. This is a great option for
those users who already have filtered water stored in their own
containers.
Automatically shuts
off when filling stops
9 foot hose supply
& 6 foot suction hose
20' power cord with
bracket
Rugged 14 gauge
steel construction
Hand Carried or wall
mounted
Call
or e-mail for pricing.
BA-MS-606
Portable Water Supply
Handy Pump- 6V Water Supply- $4.00 Shipping Added if not ordered with Battery Water Kit
$20.00
BA-MS-630 Handy Pump-
Standard PRO-FILL water supply for all PRO-FILL stand "BG"
kits. Each pump includes 60 inches of clear tubing. Pump also
includes mating Quick Coupling for BA-QDV-505 male
connector.
Complete with flow-control valve and rubber squeeze bulb.
Gravity Tank- 5 Gallon with Auto Refill
$187.50
portable water supply text Gravity Tank Simply set on a shelf or
use the included rugged steel mounting bracket. Connect the
water supply hose to a ¾ hose bib and the tank keeps itself
filled to the top. A great solution for areas where the
facility water supply is inadequate. NOTE: The bottom of the
gravity tank must be a minimum of six (6) feet above the top of the
batteries being filled.
5 gallon water
capacity
Available with or
without automatic refill valve
Includes Rugged 14
gauge steel mounting bracket
Note:
Bottom of tank must be a minimum of six (6) feet above the top of the
batteries being filled.
BA-MS-700
Gravity Tank
BA-MS-702
Gravity Tank without Auto Refill
Gravity Tank- 5 Gallon WITHOUT Auto Refill
$150.00
portable water supply text Gravity Tank Simply set on a shelf or
use the included rugged steel mounting bracket. Connect the
water supply hose to a ¾ hose bib and the tank keeps itself
filled to the top. A great solution for areas where the
facility water supply is inadequate. NOTE: The bottom of the
gravity tank must be a minimum of six (6) feet above the top of the
batteries being filled.
5 gallon water
capacity
Available with or
without automatic refill valve
Includes Rugged 14
gauge steel mounting bracket
Note:
Bottom of tank must be a minimum of six (6) feet above the top of the
batteries being filled.
BA-MS-700
Gravity Tank
BA-MS-702
Gravity Tank without Auto Refill
Male-Connector- PRO-FILL Battery Fill End with Rubber Cap
$16.00
The BA-QDV-505 Qwik-Connector is used as a replacment for
the standard PRO-FILL connector on the battery side or a
second fill point for large systems. You may purchase
this connector to add a second fill point to a secondary
battery tray located on a second level.
4' Black 2.00" Groove- Shipping will be added to Final Invoice on this part
$10.95
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
4' White 2.00" Groove- Shipping will be added to Final Invoice on this part
$10.95
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
4' Black 2.50" Groove- Shipping will be added to Final Invoice on this part
$10.95
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
4' White 2.50" Groove- Shipping will be addd to Final Invoice on this part
$10.95
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
4' Black 3.50" Groove- Shipping will be added to Final Invoice on this part
$10.95
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
4' White 3.50" WE- Shipping will be added to Final Invoice on this item
$10.95
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
4' White Flat Back- Shipping will be added to Final Invoice on this part
$10.95
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
Red Press On Cap- $.25 each
$0.25
Red Cap- PRO-FILL cap used to seal off water on unused
ports. Package of 50
Clampless Tubing- 1/4 ID- $1.50 per Foot
$1.50
Clampless Tubing- Polypropylene acid resistant tubing.
Designed to press on the swivel "T" and seal water system.
Sold by the foot or in 25 foot sections.
Club Car Precedent- Four Trojan 1275 Batteries
$165.00
BG-U48V-3 PRO-FILL-
System for 4 Batteries
Battery Manufacturer- Trojan T1275 and simular, Cell Spacing- 2.7
inches (from centeline of cap to centerine of adjancent cap)
Water Level- Standard Yellow Valve Body
Water Connector- standard QDV-505 Quick Coupler
This system is a PRO-FILL system that is used with one single fill
point. Kit includes 24 valve assemblies, 8 manifolds,
tubing, press on caps, and BA-QDV-505 male quick coupler. T
his system requires that you also
order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by Flow-Rite Controls
36 Volt E-Z Go Car- For six 6V Trojan or US Batteries with Std 2.7" Cell Spacing
$140.00
PRO-FILL Battery Water System- 36 Volts
This part number is specifically for E-Z Go golf carts
with 6 Trojan T105 or US Batteries (2.7 inch cell spacing)
and simular batteries. Kit includes 18 valve assemblies,
6 manifolds, tubing, press on caps, and BA-QDV-505 male quick coupler.
Please include the BA-MS-630 Water Supply with part number
to complete your order.
12 Volt PRO-FILL- For two 6v Trojan "PLUS SERIES"
$65.00
PRO-FILL 12 Volt Battery Watering System- Non Standard
Cell Spacing Battery Manufacture- Trojan T105 Plus, T125 Plus, T145 Plus Series and and all
other batteries with non standard cell spacing. Each
valve has a "T" that connects battery cells Cell
Spacing- Cell spacing with no avalilable standard
manifold center distance. (tubing connection between
valves) Water Level- Standard Yellow Valve Body Water
Connector- QDV-505 Quick Coupling This system is a
PRO-FILL system that is used with one single fill
point. This system requires that you also order a
BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
PRO-FILL 24 Volt- For Four 6V batteries that are NOT PLUS SERIES, NOT 2.7" or 3.3" cell spacing
$115.00
PRO-FILL 24 Volt Battery Watering System- Non Standard
Cell Spacing
Battery Manufacturer- Trojan L16H, Trojan T125, Hup Solar One, DEKA 8L16 and all other batteries
with non standard cell spacing. Each valve has a "T"
that connects battery cells
Cell Spacing- Cell spacing with no avalilable standard
manifold center distance. (tubing connection between valves)
Water Level- Standard Yellow Valve Body (1 11/16 inch shut off level from cap seal)
Water Connector- QDV-505 Quick Coupling
This system is a PRO-FILL system that is used with one
single fill point. This system requires that you also
order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
24 Volt PRO-FILL- for four 6V Trojan "PLUS SERIES"
$115.00
PRO-FILL 24 Volt Battery Watering System- Non Standard
Cell Spacing Battery Manufacture- Trojan T105 Plus, T125 Plus, T145 Plus Series and and all
other batteries with non standard cell spacing. Each
valve has a "T" that connects battery cells Cell
Spacing- Cell spacing with no avalilable standard
manifold center distance. (tubing connection between
valves) Water Level- Standard Yellow Valve Body Water
Connector- QDV-505 Quick Coupling This system is a
PRO-FILL system that is used with one single fill
point. This system requires that you also order a
BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
PRO-FILL 24V Kit- For four 6V batteries w/ 2.7" cell spacing
$115.00
BG-U24V-1 PRO-FILL System for 4 Batteries
Battery Manufacture- Crown, Deka (with 2.7" cell spacing), Enersys, US, Trojan T105,
Trojan L16 (see BG-U24V-0 for L16H), Surrett/Rolls S460 and S530 Series 4000.
Cell Spacing- 2.7 inches (from centeline of cap to
centerine of adjancent cap)
Water Level- Standard Yellow Valve Body
Water Connector- QDV-505 Quick Connector
This system is a PRO-FILL system that is used with one
single fill point. Kit includes 12 valve assemblies,
4 manifolds, tubing, press on caps, and BA-QDV-505 male quick coupler.
This system requires that you also
order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
PRO-FILL 36 Volt-For six 6V batteries that are NOT PLUS SERIES and NOT 2.7" or 3.3 " Cell Spacing
$140.00
PRO-FILL 36 Volt Battery Watering System- Non Standard
Cell Spacing conneced by 1/4 inch ID tubing.
Battery Manufacture- Trojan L16H, Trojan T125, Hup Solar One, DEKA 8L16 and all other batteries
with non standard cell spacing.
Cell Spacing- Any battery that does not have a standard
manifold. (2.7, 3.3, 2.5)
Water Level- Standard Yellow Valve Body (1 11/16 inch from cap seal surface to water full level)
Water Connector- QDV-505 Quick Coupling
This system is a PRO-FILL system that is used with one
single fill point. This system requires that you also
order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
36 Volt PRO-FILL- for six 6v Trojan "PLUS" SERIES"
$140.00
PRO-FILL 36 Volt Battery Watering System- Non Standard
Cell Spacing Battery Manufacture- Trojan T105 Plus, T125 Plus, T145 Plus Series and and all
other batteries with non standard cell spacing. Each
valve has a "T" that connects battery cells Cell
Spacing- Cell spacing with no avalilable standard
manifold center distance. (tubing connection between
valves) Water Level- Standard Yellow Valve Body Water
Connector- QDV-505 Quick Coupling This system is a
PRO-FILL system that is used with one single fill
point. This system requires that you also order a
BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
PRO-FILL 36V Kit- six 6 Volt batteries w/ 2.7 cell spacing
$140.00
presidence textBG-U36V-1 PRO-FILL-
System for Six 6 Volt Batteries
Battery Manufacturer- Crown, Deka (only with 2.7" cell spacing), Enersys, US,Interstate, Trojan T105, Trojan L16 (see BG-U36V-0 for L16H), and
Surrett/Rolls S460 and S530 Solar Series 4000.
Cell Spacing- 2.7 inches (from centeline of cap to centerine of
adjancent cap)
Water Level- Standard Yellow Valve Body
Water Connector- Standard QDV-505 Quick Coupler
This system is a PRO-FILL system that is used with one single fill
point.
Kit includes 18 valve assemblies, 6 manifolds, tubing, press on caps,
and BA-QDV-505 male quick coupler. This system requires that you
also order a BA-MS-630
Handy Pump.
Five year warranty from manufacturer. Manufactured by Flow-Rite
Controls
36 Volt E-Z G0- For six 6V Car with Energizer, Dyno/Exide batteries
$140.00
PRO-FILL Battery Water System- 36 Volts
This part number is specifically for E-Z Go golf carts
with 6 Sams Club Energizer (GC2), Dyno or EXIDE Batteries (3.3 inch cell spacing)
and simular batteries. A substitute number for this kit
is BA-MS-36V-2. Kit includes 18 valve assemblies,
6 manifolds, pre cut tubing, press on caps, and BA-QDV-505 male quick coupler.
Please include the BA-MS-630 Water Supply with part number
to complete your order.
PRO-FILL 48 Volt- For eight 6V batteries that are NOT PLUS SERIES, 2.7" or 3.3" space
$165.00
PRO-FILL 48 Volt Battery Watering System- Non Standard
Cell Spacing
Battery Manufacture- Trojan L16H , Trojan T125, Hup Solar One,DEKA 8L16 and all other batteries
with non standard cell spacing. Each valve has a "T"
that connects battery cells
Cell Spacing- Cell spacing with no avalilable standard
manifold center distance. (tubing connection between valves)
Water Level- Standard Yellow Valve Body (1 11/16 inch from cap seal surface to water full level)
Water Connector- QDV-505 Quick Coupling
This system is a PRO-FILL system that is used with one
single fill point. This system requires that you also
order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
48 Volt PRO-FILL-for eight 6V "TROJAN PLUS SERIES"
$165.00
PRO-FILL 48 Volt Battery Watering System- Non Standard
Cell Spacing Battery Manufacture- Trojan T105 Plus, T125
Plus, T145 Plus Series and and all other batteries with
non standard cell spacing. Each valve has a "T" that
connects battery cells Cell Spacing- Cell spacing with
no avalilable standard manifold center distance.
(tubing connection between valves) Water Level-
Standard Yellow Valve Body Water Connector- QDV-505
Quick Coupling This system is a PRO-FILL system that is
used with one single fill point. This system requires
that you also order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
GEM and Golf Carts- Six 8 Volt Trojan Batteries
$165.00
presidence textBG-U48V-1 PRO-FILL-
System for Six 8 Volt Trojan Batteries
Battery Manufacturer- Trojan T875 and simular, Cell Spacing- 2.3
inches (from centeline of cap to centerine of adjancent cap)
Water Level- Standard Yellow Valve Body
Water Connector- standard QDV-505 Quick Coupler
This system is a PRO-FILL system that is used with one single fill
point. Kit includes 24 valve assemblies, 6 manifolds, tubing, press
on caps, and BA-QDV-505 male quick coupler. This system requires
that you also order a BA-MS-630
Handy Pump.
Five year warranty from manufacturer. Manufactured by Flow-Rite
Controls
Golf Cart- Six 8V US Battery, EXIDE GC-8V-110, Energizer GC8, or Interstate Battery with 2.5" Cell
$165.00
BG-U48V-2 PRO-FILL System for six 8 Volt Batteries
Battery Manufacturer- US Battery, EXIDE GC8V-110, EXIDE E-4800 (8V), Sams Club (Energizer GC8), Interstate
Cell Spacing- 2.5 inches (from centeline of cap to
centerine of adjancent cap)
Water Level- Standard Yellow Valve Body
Water Connector- QDV-505 Quick Connector
This system is a PRO-FILL system that is used with one
single fill point. Kit includes 24 valve assemblies,
6 manifolds, tubing, press on caps, and BA-QDV-505 male quick coupler.
This system requires that you also
order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
PRO-FILL Battery Watering Sytem- Eight 6V Batteries with standard 2.7 inch cell
$165.00
presidence textBG-U48V-3 PRO-FILL-
System for Eight 6 Volt Batteries
Battery Manufacturer- Crown, DEKA (only those with 2.7" cell spacing), Enersys, US, Interstate, Trojan T105, Trojan L16
(see BG-U48V-0 for L16H), Surrett/Rolls S460 and S530 Solar Series 4000.
Cell Spacing- 2.7 inches (from centeline of cap to centerine of
adjancent cap) Water Level- Standard Yellow Valve Body
Water Connector- standard QDV-505 Quick Coupler
This system is a PRO-FILL system that is used with one single fill
point. Kit includes 24 valve assemblies, 8 manifolds, tubing, press on
caps, and BA-QDV-505 male quick coupler. This system requires that you
also order a BA-MS-630
Handy Pump.
Five year warranty from manufacturer. Manufactured by Flow-Rite
Controls
Golf Cart/Off Grid- PRO-FILL 8 Six Volt Batteries with 3.3" cell spacing
$165.00
BG-U48V-4 PRO-FILL System for Eight 6 Volt Batteries
Battery Manufacture- EXIDE, Sams Club, and Interstate Batteries
Cell Spacing- 3.3 inches (from centeline of cap to
centerine of adjancent cap)
Water Level- Standard Yellow Valve Body
Water Connector- QDV-505 Quick Connector
This system is a PRO-FILL system that is used with one
single fill point. Kit includes 24 valve assemblies,
8 manifolds, tubing, press on caps, and BA-QDV-505 male quick coupler.
This system requires that you also
order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
Golf Cart Yamaha "G-MAX"- Six 8 Volt Trojan Batteries
$165.00
presidence textBG-U48V-T PRO-FILL-
System for Six 8 Volt Batteries
Battery Manufacturer- Trojan T875 and simular, Cell Spacing- 2.3
inches (from centeline of cap to centerine of adjancent cap)
Water Level- Standard Yellow Valve Body
Water Connector- standard QDV-505 Quick Coupler
This system is a PRO-FILL system that is used with one single fill
point. Kit includes 24 valve assemblies, 6 manifolds, tubing, press
on caps, and BA-QDV-505 male quick coupler. This system requires
that you also order a BA-MS-630
Handy Pump.
Five year warranty from manufacturer. Manufactured by Flow-Rite
Controls
Golf Cart Yamaha "G- MAX"- 8 Volt Batteries by US and Energizer
$165.00
BG-Y48V-U PRO-FILL System for 6 Batteries
Battery Manufacture- US Battery and Sams Club Energizer (GC8) 2.5 inch cell spacing
Cell Spacing- 2.5 inches (from centeline of cap to
centerine of adjancent cap)
Water Level- Standard Yellow Valve Body
Water Connector- standard QDV-505 Quick Coupler
This system is a PRO-FILL system that is used with one
single fill point. Kit includes 24 valve assemblies,
6 manifolds, tubing, press on caps, and BA-QDV-505 male quick coupler.
This system requires that you also
order a BA-MS-630 Handy Pump.
Five year warranty from manufacturer. Manufactured by
Flow-Rite Controls
FIRM White #10- Shipping will be added to Final Invoice on this product
$19.95
Firm White #11- Shipping will be added to Final Invoice on this product
$19.95
FIRM White #12- Shipping will be added to Final Invoice on this part
$19.95
Flat, FIRM White #1- Shipping will be added to Final Invoice on this product
$12.95
FIRM White #2- Shipping will be added to Final Invoice on this product
$13.75
FIRM White #3- Shipping will be added to Final Invoice on this product
$13.75
FIRM White #4- Shipping will be added to Final Invoice on this product
$13.95
FIRM White #6- Shipping will be added to Final Invoice on this product
$11.95
FIRM White #8- Shipping will be added to Final Invoice on this product
$13.95
FIRM White #9- Shipping will be added to Final Invoice on this product
$15.95
FIRM White #7- Shipping will be added to Final Invoice on this product
$13.95
3' White Flat Back- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
2' Black 2.00" Groove- Shipping will be added to Final Invoice
$7.49
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
2' White 2.00" Groove- Shipping will be added to Final Invoice
$7.49
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
2' Black 2.50" Groove- Shipping will be added to Final Invoice
$7.49
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
2' White 2.50" Groove- Shipping will be added to Final Invoice
$7.49
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
2' Black 3.50" Groove- Shipping will be added to Final Invoice
$7.49
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
2' White 3.50" Groove- Shipping will be added to Final Invoice
$7.49
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
2' Black Flat Back- Shipping will be added to Final Invoice
$7.49
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
2' White Flat Back- shipping will be added to Final Invoice
$7.49
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' Black 2.00" Groove- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' White 2.00" Groove- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' Black 2.50" Groove- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' White 2.50" Groove- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' Black 3.50" Groove- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' White 3.50" Groove- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' Black Flat Back- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' Black "L" Back- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
3' White "L" Back- Shipping will be added to Final Invoice on this part
$8.67
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
4' Black Flat Back- Shipping will be added to Final Invoice on this part
$10.95
Please contact JWP for shipping estimate for this product.
Shipping will vary depending on your area code.
"A" FIRM Black- 24" Corner- Shipping will be added to Final Invoice on this part
$46.95
Dock Harbor Cushion- Corner protector to protect corner form impact
Size- 5" thick x 12" high x 24" length of each leg, black.
Case Quantity- 2, dd $5.00 for less than case quantities.
Weight- 20 pounds
Shipping applies to this part.
"A"-Firm- White 24" Corner- Shipping will be added to Final Invoice on this part
$46.95
Dock Harbor Cushion- "FIRM" Corner protector to protect corner form impact
Size- 5" thick x 12" high x 24" length of each leg, white
Case Quantity- 2, add $5.00 for less than case quantities.
Weight- 20 pounds
Shipping applies to this part.
"B" FIRM Black Dock Harbor Cushion 48" Long- Shipping will be added to Final Invoice on this part
$46.95
Dock Harbor Cushion- vertical or horizontal protection
with flat surface on back.
Size- 5" thick x 12" wide x 48" length, black
Case Quantity- 2, Add $5.00 to less than case quantities.
Weight- 20 pounds, shipping applies to this part.
Price is per item.
"B" FIRM, White Dock Harbor Cushion 48" Long- Shipping will be added to Final Invoice on this part
$46.95
Dock Harbor Cushion- Vertical or Horizontal
protection with flat surface on back side.
Size- 5" thick x 12" wide x 48" length, white
Case Quantity- 2, Add $5.00 to less than case quantities.
Weight- 20 pounds, shipping applies to this part.
Price is per item.
Shipping not included in price. Actual shipping charges will be added to your final order.
"C" FIRM Black Dock Harbor Cushion, 48" Long- Shipping will be added to Final Invoice on this part
$46.95
Dock Harbor Cushion"FIRM"- Vertical or Horizontal
protecton with "V" groove in back to a attach to post.
Size- 5" thick x 12" wide x 48" length, black
Case Quantity- 2, add $5.00 to less than case quantities.
Weight- 20 pounds, shipping applies to this part.
Price is per item.
"C" FIRM, White Dock Harbor Cushion 48" Long- Shipping will be added to Final Invoice on this part
$46.95
Dock Harbor Cushion"FIRM"- Vertical or Horizontal
protection with "V" groove in back to a attach to post.
Size- 5" thick x 12" wide x 48" length, white
Case Quantity- 2, add $5.00 to less than case quantities.
Weight- 20 pounds, shipping applies to this part.
Price is per item.
38" Foam Filled Mooring Buoy- Shipping will be added to Final Invoice on this part
$299.95
38" Mooring Buoy- Please see "Ace Dock Accessories" to select
harware for this assembly.
Shipping- actual shipping cost applies to this product.
12" Dia- Foam Filled Mooring Buoy- Shipping will be added to Final Invoice on this part
$52.95
12" Mooring Buoy- Please see "Ace Dock Accessories" to select
harware for this assembly.
12" Fixed Mooring Hardware Kit- Shipping will be added to Final Invoice on this part
$29.95
ace mooring hardwareFFMB-
12F Fixed Mooring System
This hardware kit
captures the buoy on both ends and provides a swivel at the
bottom for attachment of the anchor line. A loop
is provided at the top for handling the buoy and storage of the
watercraft pendant lineon the buoy. Never anchor the
watercraft directly to this loop. Watercraft MUST be anchored below
the buoy and directly to the anchor line.
This kit is for a 12 inch Mooring Buoy.
18" Foam Filled Mooring Buoy- Shipping will be added to Final Invoice on this part
$74.95
18" Mooring Buoy- Please see "Ace Dock Accessories" to select
harware for this assembly.
Shipping- actual shipping cost applies to this product.
18" Fixed Mooring Hardware Kit- Shipping will be added to Final Invoice on this part
$29.95
ace mooring hardwareFFMB-
18F Fixed Mooring System
This hardware kit
captures the buoy on both ends and provides a swivel at the
bottom for attachment of the anchor line. A loop
is provided at the top for handling the buoy and storage of the
watercraft pendant lineon the buoy. Never anchor the
watercraft directly to this loop. Watercraft MUST be anchored below
the buoy and directly to the anchor line.
This kit is for a 18 inch Mooring Buoy.
24" Foam Filled Mooring Buoy- Shipping will be added to Final Invoice on this part
$119.95
24" Mooring Buoy- Please see "Ace Dock Accessories" to select
harware for this assembly.
Shipping- actual shipping cost applies to this product.
24" Fixed Mooring Hardware Kit- Shipping will be added to Final Invoice on this part
$29.95
ace mooring hardwareFFMB-
24F Fixed Mooring System
This hardware kit
captures the buoy on both ends and provides a swivel at the
bottom for attachment of the anchor line. A loop
is provided at the top for handling the buoy and storage of the
watercraft pendant lineon the buoy. Never anchor the
watercraft directly to this loop. Watercraft MUST be anchored below
the buoy and directly to the anchor line.
This kit is for a 24 inch Mooring Buoy.
32" Foam Filled Mooring Buoy- Shipping will be added to Final Invoice on this part
$234.95
32" Mooring Buoy- Please see "Ace Dock Accessories" to select
harware for this assembly.
Shipping- actual shipping cost applies to this product.
42" Foam Filled Mooring Buoy- Shipping will be added to Final Invoice on this part
$389.95
42" Mooring Buoy- Please see "Ace Dock Accessories" to select
harware for this assembly.
Shipping- actual shipping cost applies to this product.
Pass Through Mooring Hardware System- Shipping will be added to Final Invoice on this part
This hardware kit passes
through the buoy center tube. The
anchor line is attached directly to the line shackle. A
bearing
plate under the schackle prevents the schackle from passing
through the buoy tube. The watercraft's pendant line is f
fastened direcgty to the schackle
Fold and Go Portable Dock Cushion- Shipping will be added to Final Invoice on this part
$49.95
Fold and Go- Portable Dock Cushion
Size- 5 Wide x 8 Thick x 41 Long. Shipping weight is 7# each.
Actual shipping cost will be added to your order.
Wide Step Swing Ladder- 7 Step, Price Includes FREE Shipping
$292.95
Wide Step Swinging Dock
Ladder-
Aluminum
Swinging Dock Ladder- 3 Step The "Wide Step Swing Ladder" by IDP has
the same great dock ladder features as the standard swing ladder. The
"Swing Ladder can be stored and secured up and out of the water (90
degrees) with quick release pin to retain the selected position. This
dock ladder has a fixed stainless steel bolt through the ladder which
pivots in a self lubricationg brass bushing that is press fit into the
mounting bracket.
Details:
Constructed from 6063 T5
Marine Grade Aluminum.
Tig welding for maximum
strength and durability.
Extruded with grooves to
provide sure footing and reduce slippage.
Ideal for fresh and
salt water applications.
500 lb. capacity... best in
the industry! FREE Ground Shipping on this item.
Needed
Hardware: Requires 4, 1/2" diameter bolts (2 x 2). Galvanized or
stainless steel (stainless for salt water environment). Length of bolt
will vary according to the structure being installed on. Bolts can be
found at your local hardware store.
Manufactured by International Dock Products
Wide Step Finger Pier Lift- 4 Step
$229.95
Finger Pier Lifting Ladder-
The IDP "Finger Pier
Lift Ladder" is an innovative retractable ladder featuring double
groove hanger.. To extend the life of the simply pull up the lower
section above the water line to eliminate marine growth. This model has a long base, with
it's fixed portion extending 25 inches from the top of the dock.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
Extruded with grooves to provide
sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
FREE
Ground Shipping on this item. Needed
Hardware: Requires 4, 1/2" diameter bolts (2 x 2). Galvanized or
stainless steel (stainless for salt water environment). Length of bolt
will vary according to the structure being installed on. Bolts can be
found at your local hardware store.
Manufactured by International Dock Products
Dock D'Fender Model 2700-0 with Attachment Kit- Free Shipping on orders of two or more!
$122.95
The attachment kit allows the Dock D'Fender to be
mounted to floating docks or piers without posts. It
includes a 33" tall post, side mounting bracket, and
post covers.
Carmanah Solar LED Marine Lantern- 2 Mile
$419.95
Solar Powered LED Marine Dock
Light- 2 Mile Model 602-
2 Nautical Miles Range Up to 2 nautical miles (3.6km) The Model 602 is
a multipurpose solar-powered marine light suitable for virtually any
navigation or hazard-marking requirement up to 2 nautical miles in
range. To-date, more than 40,000 units have been used around the world
for all types of industrial/commercial applications. Using an array of
ultra bright LEDs (light emitting diodes), the 602 can produce light
output in five colors that meet the international chromaticity
requirements for green, red, amber, white and blue. It can also produce
all IALA standard flash patterns and custom patterns can be special
ordered. The 602 charges during the day, even under cloudy conditions,
and turns on automatically at night. It also features sophisticated
microprocessor intelligence that enables advanced light output control
and battery power management, as well as precisely controlled flash
rates.
APPLICATIONS Small safety / hazard marking buoys Low range navigation
buoys Research buoys Private aids to navigation Port and marina
entrances Channel and canal markers Offshore oil & gas
infrastructure Oil containment booms Public piers, docks and marine
walkways Boat and barge terminals Breakwaters and all types of marine
infrastructure
BENEFITS Quick, non-technical installation. Minimal capital cost. Pays
for itself within the first year of operation in the form of reduced
installation, maintenance and servicing costs. Reliable operation 365
days per year. Operates at nearly any location on earth.
FEATURES Uses Carmanah's proprietary MicroSource™ solar LED
lighting technologies. Completely integrated, self-contained,
waterproof and compact. Polymer encapsulated design and solid-state
electronics make the 602 extremely durable and vandal resistant.
Installs in minutes using three screws or bolts. No external wiring,
cable trenching, etc. Turn on automatically at dusk and off at dawn.
Uses LEDs (light emitting diodes) with approximately 100,000 hour
lifespan. No bulbs to replace... ever. Available in blue, red, amber,
white and green LED output colors - allowing for virtually any marine
lighting applications. If required for color indication when off, the
602 can also be ordered with blue, red or amber lenses. Can produce any
flash pattern required (including steady on) An optional infrared
programmer is available to change flash pattern, change intensity
level, activate/deactivate the unit and check battery level for current
capacity.
OPTIONS
Adapter plate for threaded mounting. Various threaded mounts. Three
year warranty.
PRO-FILL 6 Volt Manifold Assembly
$24.95
PRO-FILL Manifold Assembly
Replacement manifold assembly for 6 Volt battery.
BA-121 Manifold Color- Black and Blue (2.7 inch cell spacing)
BA-123 Manifold Color- Black and White (3.3 inch cell spacing)
PRO-FILL 8 Volt Manifold Assembly
$31.95
PRO-FILL 8 Volt Maniflod Assembly
BA-120 Black Manifold with Yellow Valve Assemblies
(2.3 cell spacing),
BA-122 Black and Red Manifold with Yellow Valve assemblies
(2.5 inch cell spacing).
Dock D'Fender Model 2700- 2" Dia Post- Free Shipping on orders of two or more!
$87.99
Dock Defender Model 2700- 2.00 Inch Dia Post-
The Standard 2700 model provides impact protection for
boat up to 24' moored in calm or choppy waters. The 2700
features 27"L x 8.5" Dia premium vinyl fenders and all
necessary mounting hardware and fasteners.
Price is per each kit.Free shipping on orders of two or more.
Manufactured in USA.
Dock D'Fender Model 2700- Attachment Kit- Shipping added to final invoice
$39.95
This attachment kit includes a 30" long post, caps, and
die-cast mounting bracket to attachment the Model 2700 Dock
D'Fender to your dock or seawall. Bracket can be custom
drilled for your application. You must have a vertical
stringer on your dock or seawall to mount the custom
bracket.
Sold as single item.
Free Freight for order over $1500.00, 5% discount on
orders over $2500.
Manufactured in USA.
Dock D'Ffender Model 2700- 1.50 Dia Post- Free Shipping on orders of two or more!
$87.99
Dock D'Fender Model 2700- 1.50 Dia Post-
The Standard 2700 model provides impact protection for
boat up to 24' moored in calm or choppy waters. The 2700
features 27"L x 8.5" Dia premium vinyl fenders and all
necessary mounting hardware and fasteners.
Price is per each kit. Free shipping on orders of two or more.
Manufactured in USA.
Dock D'Fender Model 3000- Attachment Kit- shipping added to final invoic
$0.00
This attachment kit includes a 33" long post, caps, and
die-cast mounting bracket to attachment the Model 2700 Dock
D'Fender to your dock or seawall. Bracket can be custom
drilled for your application. You must have a vertical
stringer on your dock or seawall to mount the custom
bracket.
Sold as single item.
Free Freight for order over $1500.00, 5% discount on
orders over $2500.
Manufactured in USA.
Dock Defender Model 3000- 2.00 Dia Post- Free Shipping on orders of two or more!
$96.95
Dock D'Fender Model 3000- 2.0 Dia Post-
The Standard 3000 model provides impact protection for
boat up to 32' moored in calm or choppy waters. The 3000
features 33"L x 10.5" Dia premium vinyl fenders and all
necessary mounting hardware and fasteners.
Price is per each kit.
Free shipping on orders of two or more.
Manufactured in USA
Dock D'Fender Model 3000- With Attachment - Free Shipping on orders of two or more!Kit
$134.95
The attachment kit allows the Dock D'Fender to be
mounted to floating docks or piers without posts. It
includes a 33" tall post, side mounting bracket, and
post covers.
Free shipping with orders of two or more.
Made in USA
Dock D'Fender Model 3000- 1.68" Dia Post- Free Shipping on orders of two or more!
$97.99
Dock D'Fender Model 3000- 1.68 Dia Post-
The Standard 3000 model provides impact protection for
boat up to 32' moored in calm or choppy waters. The 3000
features 33"L x 10.5" Dia premium vinyl fenders and all
necessary mounting hardware and fasteners.
Price is per each kit.
Free shipping on orders of two or more.
Manufactured in USA
Dock D'Fender Model 3000- 1.50" Post- Free Shipping on orders of two or more!
$97.99
Dock D'Fender Model 3000- 1.50 Dia Post-
The Standard 3000 model provides impact protection for
boat up to 32' moored in calm or choppy waters. The 3000
features 33"L x 10.5" Dia premium vinyl fenders and all
necessary mounting hardware and fasteners.
Price is per each kit.
Free shipping on orders of two or more.
Manufactured in USA.
Select Pro Switch (SP)- Battery Selector Switch- $7.95 Shipping Added to Final Invoice
$74.95
Select Pro Switch:
The Select Pro Switch was designed to allow you to divert one bank of
any of our chargers to another battery. Allows you to select the
batteries you want to be charged simply with the touch of a switch. It
can be used to add an extra battery to any of our built-in systems.
Waterproof, ready to install. Features: Waterproof Weighs one pound
Ready to install 4.5" X 6" X 2" No installation restrictions Two year
warranty.
Shipping charges will be added to your order based on
actual FED-EX Ground rates to your address. Any special instructions for shipping will
be refllected in your final invoice.
PRO SERIES Charger PS2- Dual Battery Charger- $16.95 Shipping Added to Final Invoice
$289.95
PROFESSIONL SERIES PS2- 15 Amp
Dual Battery
Charger-
The Professional Series
chargers have set the standard in the marine industry for more than a
decade. They are known as the safest, most reliable, and best
performing battery chargers in the industry. Across a broad range of
fishing and recreational boats, Pro Charging Systems keeps boaters on
the water longer while extending the life of their batteries. Dual
ProTM charging technology has been and continues to be the choice of
over 50 boat manufacturers and professional fishermen on the B.A.S.S.
and FLW tournament circuit.
Battery
Charging System Designed for Use On Land and in Fresh and Salt Water
The "Green" Charger: Totally "Repairable" Not a Throw-Away
Unmatched Performance, Reliability, Safety and Quality
TROUBLE FREE - Just Plug It In and Forget It!
Join Over 750,000 of Our Satisfied Customers!
Fully Automatic and Totally Waterproof
May be used in
many types of sporting applications including: Inland Watercraft, Salt
Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...
Product Features
Approved for Wet Cell
and AGM batteries
Models also available
for Gelled Electrolyte batteries
Designed for use in
fresh and saltwater
Dependable, rugged
construction
Waterproof
Independent outputs
Fully automatic / multi
stage charging
Zero spark technology
Battery maintenance mode
On-board diagnostic
codes
Temperature compensated
Advanced microprocessor
controlled
Battery systems
available: 12V - 48V
LED lights indicate the
state of charge
Reverse polarity
protected
No installation
restrictions
FCC Parts A & B
interference compliant
DC charge cables = 5ft.
AC power cord = 3ft.
Approved and meets ISO
8846 Marine standards
Ignition
protected (US Coast Guard 33 CFR 183.410
Specs: Total Output: 2 x 15
Amps
per bank Size: Height 6" X Width 6 1/2" X
Length 11 1/2" Weight:15 lbs Battery System: 12 Volt
& 24Volt
Shipping
charges will be added to your order.
E-Z Board Pivoting Ladder- 1 Step
$689.95
Premium
JWP E-Z Board- 1 Step
Specifications: One Step- 10
inch drop, Stairway Angle- 30
degrees Stair Tread
Design- Extra wide 5 inch tread width with waterproof
anti-skid adhesive film applied to stair tread.
Railing- 1 1/4 dia. brushed stainless steel tubing.
Hardware- solid stainless steel
Construction-
Stainess steel railing and hardware, aluminum welded
stairway and mounting bracket. Stardust Silver
powdercoat paint on stairway and mounting bracket. Custom
Ladder- This unique ladder is designed
at a 30 degree
slop for easy boarding of your boat. All stainless steel
and aluminum construction.
Operation- This
dock ladder also contains
four pivoting arms
that allow the dock laddder to pivot up to a stored position.
The stored position allows easy entry and exit from your dock
without fear of hitting the ladder. Safety-
A safety pin is provided with this dock ladder to prevent accidental
lowering or raising during use or time spent away from the
dock. 3M
anti-skid strip on each stair tread to
prevent slipping.
Special order-
please allow 30 days for
delivery.
Premium E-Z Board- 2 Step
$699.95
Premium
JWP E-Z Board- 2 Step
Specifications: Two Step- 20
inch drop, Stairway Angle- 30
degrees Stair Tread
Design- Extra wide 5 inch tread width with waterproof
anti-skid adhesive film applied to stair tread.
Railing- 1 1/4 dia. brushed stainless steel tubing.
Hardware- solid stainless steel
Construction-
Stainess steel railing and hardware, aluminum welded
stairway and mounting bracket. Stardust Silver
powdercoat paint on stairway and mounting bracket. Custom
Ladder- This unique ladder is designed
at a 30 degree
slop for easy boarding of your boat. All stainless steel
and aluminum construction.
Operation- This
dock ladder also contains
four pivoting arms
that allow the dock laddder to pivot up to a stored position.
The stored position allows easy entry and exit from your dock
without fear of hitting the ladder. Safety-
A safety pin is provided with this dock ladder to prevent accidental
lowering or raising during use or time spent away from the
dock. 3M
anti-skid strip on each stair tread to
prevent slipping.
Special order-
please allow 30 days for
delivery.
Premium JWP E-Z Board- 3 Step
$724.95
Premium
JWP E-Z Board- 3 Step
Specifications: Three Step- 30
inch drop, Stairway Angle- 30
degrees Stair Tread
Design- Extra wide 5 inch tread width with waterproof
anti-skid adhesive film applied to stair tread.
Railing- 1 1/4 dia. brushed stainless steel tubing.
Hardware- solid stainless steel
Construction-
Stainess steel railing and hardware, aluminum welded
stairway and mounting bracket. Stardust Silver
powdercoat paint on stairway and mounting bracket. Custom
Ladder- This unique ladder is designed
at a 30 degree
slop for easy boarding of your boat. All stainless steel
and aluminum construction.
Operation- This
dock ladder also contains
four pivoting arms
that allow the dock laddder to pivot up to a stored position.
The stored position allows easy entry and exit from your dock
without fear of hitting the ladder. Safety-
A safety pin is provided with this dock ladder to prevent accidental
lowering or raising during use or time spent away from the
dock. 3M
anti-skid strip on each stair tread to
prevent slipping.
Special order-
please allow 30 days for
delivery.
Floating Dock Lift Ladder- 3 Step
$194.95
Floating Dock Lift Ladder- 3 Step
The "Floating Dock Lift Ladder" has no "Hoop Handles" and
is specifically designed for floating docks that are
designed close to the water. This dock ladder is identical
to the "Finger Pier Lift Ladder" except that when in the
stored position the ladder only extends 14.5 inches below
the mounting surface. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
12 inches per step
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Floating Dock Lift Ladder- 4 Step
$204.95
Floating Dock Lift Ladder- 4 Step
The "Floating Dock Lift Ladder" has no "Hoop Handles" and
is specifically designed for floating docks that are
designed close to the water. This dock ladder is identical
to the "Finger Pier Lift Ladder" except that when in the
stored position the ladder only extends 14.5 inches below
the mounting surface. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
12 inches per step
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Floating Dock Lift Ladder- 5 Step
$217.95
Floating Dock Lift Ladder- 5 Step
The "Floating Dock Lift Ladder" has no "Hoop Handles" and
is specifically designed for floating docks that are
designed close to the water. This dock ladder is identical
to the "Finger Pier Lift Ladder" except that when in the
stored position the ladder only extends 14.5 inches below
the mounting surface. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
12 inches per step
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Floating Dock Lift Ladder- 6 Step
$227.95
Floating Dock Lift Ladder- 6 Step
The "Floating Dock Lift Ladder" has no "Hoop Handles" and
is specifically designed for floating docks that are
designed close to the water. This dock ladder is identical
to the "Finger Pier Lift Ladder" except that when in the
stored position the ladder only extends 14.5 inches below
the mounting surface. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
12 inches per step
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Floating Dock Lift Ladder- 7 Step
$237.95
Floating Dock Lift Ladder- 7 Step
The "Floating Dock Lift Ladder" has no "Hoop Handles" and
is specifically designed for floating docks that are
designed close to the water. This dock ladder is identical
to the "Finger Pier Lift Ladder" except that when in the
stored position the ladder only extends 14.5 inches below
the mounting surface. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
12 inches per step
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Standard- 3 Step
$149.95
Finger Pier Standard- 3 Step
The "Finger Pier Standard" ladder has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge. This is a fixed dock ladder that attaches
permanently to the dock or sea wall. Top end of tube
welded smooth and closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Standard- 4 Step
$159.95
Finger Pier Standard- 4 Step
The "Finger Pier Standard" ladder has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge. This is a fixed dock ladder that attaches
permanently to the dock or sea wall. Top end of tube
welded smooth and closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Standard- 5 Step
$169.95
Finger Pier Standard- 5 Step
The "Finger Pier Standard" ladder has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge. This is a fixed dock ladder that attaches
permanently to the dock or sea wall. Top end of tube
welded smooth and closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Standard- 6 Step
$179.95
Finger Pier Standard- 6 Step
The "Finger Pier Standard" ladder has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge. This is a fixed dock ladder that attaches
permanently to the dock or sea wall. Top end of tube
welded smooth and closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Standard- 7 Step
$229.95
Finger Pier Standard- 7 Step
The "Finger Pier Standard" ladder has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge. This is a fixed dock ladder that attaches
permanently to the dock or sea wall. Top end of tube
welded smooth and closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Lift Ladder- 3 Step
$179.95
Finger Pier Lift Ladder- 3 Step
The "Finger Pier Lift Ladder" has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge and has no hoop handles. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Lift Ladder- 4 Step
$189.95
Finger Pier Lift Ladder- 4 Step
The "Finger Pier Lift Ladder" has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge and has no hoop handles. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Lift Ladder- 5 Step
$199.95
Finger Pier Lift Ladder- 5 Step
The "Finger Pier Lift Ladder" has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge and has no hoop handles. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Lift Ladder- 6 Step
$209.95
Finger Pier Lift Ladder- 6 Step
The "Finger Pier Lift Ladder" has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge and has no hoop handles. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches permanently to the
dock or sea wall. Top end of tube welded smooth and
closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Finger Pier Lift Ladder- 7 Step
$219.95
Finger Pier Lift Ladder- 7 Step
The "Finger Pier Lift Ladder" has no "Hoop Handles".
This dock ladder takes up only 6" of space from the dock
edge and has no hoop handles. This is a fixed dock ladder
with a movable lower section. To extend the lift of the
ladder simply pull up the lower section above the water
line to eleminate marine growth. This ladder attaches
permanently to the dock or sea wall. Top end of tube
welded smooth and closed for safe use.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
Safety Cables- prevent loss of lower section in water.
500 lb. capacity... best in the industry!
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store.
FREE Ground Shipping on this item. Manufactured by A1A
Floatstep Dock Ladder- 3 Step
$449.95
Floatstep Dock Ladder- 4 Step
$479.95
Floatstep Dock Ladder- 5 step
$529.95
Floatstep Dock Ladder- 6 Step
$569.95
Floatstep Dock Ladder- 7 Step
$599.95
Float Step Swim Ladder- 5 Step
$599.95
Floatstep Swim Ladder- 3 Step
$499.95
Floatstep Swim ladder- 4 step
$549.95
Standard Lifting Ladder- 3 Step
$165.95
Lifting Ladder- 3 Step
The "Lift Ladder" is an innovative retractable ladder
featuring a new and improved heavy duty rung hanger. To
extend the life of the simply pull up the lower section
above the water line to eliminate marine growth.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
14 inch diameter hand rail.
For a more comfortable dock ladder, see the all new
WIDE STEP. This dock ladder has a 4 inch wide tread width
as compared to the standard 2 inch tread width.
FREE Ground Shipping on this item. Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily
or remove your ladder for seasonal use.
Standard Lift Ladder- 4 Step
$175.95
Lifting Ladder- 4 Step
The "Lift Ladder" is an innovative retractable ladder
featuring a new and improved heavy duty rung hanger. To
extend the life of the simply pull up the lower section
above the water line to eliminate marine growth.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
14 inch diameter hand rail.
For a more comfortable dock ladder, see the all new
WIDE STEP. This dock ladder has a 4 inch wide tread width
as compared to the standard 2 inch tread width.
FREE Ground Shipping on this item. Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily
or remove your ladder for seasonal use. m Five step ladder shown.
Standard Lift Ladder- 5 Step
$185.95
Lifting Ladder- 5 Step
The "Lift Ladder" is an innovative retractable ladder
featuring a new and improved heavy duty rung hanger. To
extend the life of the simply pull up the lower section
above the water line to eliminate marine growth.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
14 inch diameter hand rail.
For a more comfortable dock ladder, see the all new
WIDE STEP. This dock ladder has a 4 inch wide tread width
as compared to the standard 2 inch tread width.
FREE Ground Shipping on this item. Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily
or remove your ladder for seasonal use. Five step ladder shown.
Standard Lift Ladder- 6 Step
$195.95
Lifting Ladder- 6 Step
The "Lift Ladder" is an innovative retractable ladder
featuring a new and improved heavy duty rung hanger. To
extend the life of the simply pull up the lower section
above the water line to eliminate marine growth.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
14 inch diameter hand rail.
For a more comfortable dock ladder, see the all new
WIDE STEP. This dock ladder has a 4 inch wide tread width
as compared to the standard 2 inch tread width.
FREE Ground Shipping on this item. Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily
or remove your ladder for seasonal use. Five step ladder
shown in picture.
Standard Lift Ladder- 7 Step
$234.95
ikLifting Ladder- 7 Step
The "Lift Ladder" is an innovative retractable ladder
featuring a new and improved heavy duty rung hanger. To
extend the life of the simply pull up the lower section
above the water line to eliminate marine growth.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
14 inch diameter hand rail.
For a more comfortable dock ladder, see the all new
WIDE STEP. This dock ladder has a 4 inch wide tread width
as compared to the standard 2 inch tread width.
FREE Ground Shipping on this item. Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily
or remove your ladder for seasonal use. Five step shown
in photo.
V5.0 Solar Dock Light- Per Pair- FREE SHIPPING on orders greater than three pair
$45.00
The V5.0
Solar
Dock Lite™-
The new
"Version 5.0" is a
great way to light up your dock or pier. During the day the
solar panel collects the
sun's energy and charges the batteries. At
nightfall, Solar Dock Lite's sensor automatically turns on the super
bright LED. With multiple units your dock will provide an
elegantly lit pathway for all
to walk on. This unit is hands free and energy efficient! Lasts 20+
hours on a full charge and is 3X brighter
than conventional solar garden lights! Just place it on your dock post
and you are ready to go!
The all new "Version 5.0 has a 3X
brighter jumbo sized screw in bulb and all new level light brightness
technology. New circuitry will keep your lights at the same level all
night long.
You can even adjust the brightness with dual mode light
level switching.
We know not everyone's favorite color is
the same so you can choose
from White, Blue, Green, Red, Orange, or Yellow! Order additional light
colors separately, only $1.75
for each color!
After
all who wants the same color as their neighbor?
Sold in pairs only. Price shown is for one pair.
Free
shipping on quantities greater than three pair!
Select your type of dock post from the chart below and then
click on this style above!
Model M502- One Nautical Mile
Range Up to 1 nautical mile (1.8km)
The Model 502 is a multipurpose solar-powered marine light suitable for
virtually any low intensity navigation or hazard-marking requirement.
What sets the 502 apart from any other light is its unique encapsulated
design. The unit is completely waterproof, vibration proof and vandal
resistant. It is designed for autonomous operation without any
maintenance (ie. bulb or battery replacement) for up to 5 years. The
502 is available in red, green, amber, white and blue LED output colors
using a clear lens. For daytime indication, colored lenses are
available on request.
APPLICATIONS- Mooring buoys Research buoys Dredging lines Oil
containment booms Aquaculture farm perimeters Private and commercial
docks, swim rafts, etc. Breakwaters and channel markers BENEFITS Quick,
non-technical installation. Low capital cost. Pays for itself within
the first year of operation in the form of reduced installation,
maintenance and servicing costs. Reliable operation 365 days per year.
Operates at nearly any location on earth.
FEATURES- Uses Carmanah's proprietary MicroSource™ solar LED
lighting technologies. Completely integrated,
self-contained,waterproof,and compact. Polymer encapsulated design and
solid-state electronics make the 502 extremely durable and vandal
resistant. Installs in minutes using three screws or bolts. No external
wiring, cable trenching, etc. Turns on automatically at dusk and off at
dawn. Uses LEDs (light emitting diodes) with approximately 100,000 hour
lifespan. No bulbs to replace... ever. Available in red, green, amber,
white and blue LED output colors - allowing for virtually any marine
lighting applications. If required for color indentification when off,
the 501 can also be ordered with red, amber or blue lenses. Can produce
one of seven IALA standard flash patterns (including steady on)
Intelligent electronics ensure the batteries will last up to five years
without maintenance or servicing. Manufactured under ISO 9001:2000
Quality Assurance System.
OPTIONS Adapter plate for threaded mounting. Various threaded mounts.
Three year warranty.
PRO SERIES Charger PS1- 15 AMP Single Battery- $16.95 Shipping Added to Final Invoice
$199.95
PROFESSIONL SERIES PS1- 15 Amp
Single Battery
Charger-
The Professional Series
chargers have set the standard in the marine industry for more than a
decade. They are known as the safest, most reliable, and best
performing battery chargers in the industry. Across a broad range of
fishing and recreational boats, Pro Charging Systems keeps boaters on
the water longer while extending the life of their batteries. Dual
ProTM charging technology has been and continues to be the choice of
over 50 boat manufacturers and professional fishermen on the B.A.S.S.
and FLW tournament circuit.
Battery
Charging System Designed for Use On Land and in Fresh and Salt Water
The "Green" Charger: Totally "Repairable" Not a Throw-Away
Unmatched Performance, Reliability, Safety and Quality
TROUBLE FREE - Just Plug It In and Forget It!
Join Over 750,000 of Our Satisfied Customers!
Fully Automatic and Totally Waterproof
May be used in
many types of sporting applications including: Inland Watercraft, Salt
Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...
Product Features
Approved for Wet Cell
and AGM batteries
Models also available
for Gelled Electrolyte batteries
Designed for use in
fresh and saltwater
Dependable, rugged
construction
Waterproof
Independent outputs
Fully automatic / multi
stage charging
Zero spark technology
Battery maintenance mode
On-board diagnostic
codes
Temperature compensated
Advanced microprocessor
controlled
Battery systems
available: 12V - 48V
LED lights indicate the
state of charge
Reverse polarity
protected
No installation
restrictions
FCC Parts A & B
interference compliant
DC charge cables = 5ft.
AC power cord = 3ft.
Approved and meets ISO
8846 Marine standards
Ignition
protected (US Coast Guard 33 CFR 183.410
Specs: Total Output: 15 Amps
per bank Size: Height 6" X Width 6 1/2" X
Length 8 1/2" Weight:8 lbs Battery System: 12 Volt
Shipping
charges will be added to your order based on actual FED-EX Ground rates
to your address. Any special instructions for shipping will
be refllected in your final invoice.
12V Dual Battery Qwik Fill Kit A
$62.00
The Quick-Fill Kit A- Battery Watering System is for two 12 Volt batteries.
Safely fill your batteries without removing vent covers. Sends water to low cells
automatically to low cells while shutoff valves keep water out of filled cells to prevent overflowing.
The RV2020 pump
must be ordered separately (Required for Use)(Kit E).
Fits all group 24 and 27 and most 29 through 31 Lead-Acid batteries.
Kit includes all parts necessary for two batteries.
The Quik-Fill Battery Watering System is quick and easy to set up and use.
It will save you time and money, by making battery maintenance fast,simple, and accurate.
Three Year Warranty by manufacturer. Manufactured by FLOW-RITE
12V Single Battery Qwik-Fill Kit B- Shipping applies if ordered as a single item
$31.00
12V Qwik-Fill Kit C- Water Pump- Service Part Only- See RV2020
$17.00
12V Qwik-Fill Kit D- 20' Clear Tubing- Shipping applies if ordered as a single item
"MAP"- Some manufacturers mandate a "Minimum Advertised
Price". Please submit a request for quote via our "CONTACT
US" tab at the top for quotes on multiple units.
Roll-N-Go 750
$1,399.95
Roll-N-Go 750 Extention- Minimum Advertised Price
$659.95
"MAP"- Some manufacturers mandate a "Minimum Advertised
Price". Please submit a request for quote via our "CONTACT
US" tab at the top for quotes on multiple units
Roll-N-Go PWC
$799.00
PWC Extension- Minimum Advertised Price
$549.95
"MAP"- Some manufacturers mandate a "Minimum Advertised
Price". Please submit a request for quote via our "CONTACT
US" tab at the top for quotes on multiple units.
925 RV Ez Level
$49.95
925 RV EzLevel- Molded plastic level
with illuminated indicator to ensure
easy visibility.
Shipped via Fed Ex Ground- actual shipping cost apply.
RV Innovations Night Owl- Charcoal Qty 1
$29.95
This is one light, charcoal. Shipping charges apply to this order. Order is shipped via FED EX Ground. $5.00
RV Innovations Night Owl- White Qty 1
$29.95
Shipped as one light. This part number is WHITE molded light case. This product is shipped via FED EX Ground. Shipping charges apply. $5.00
RV Innovations Night Owl- Charcoal Qty 2
$49.95
This is a set of two lights, charcoal. Shipping charges apply to this order. Order is shipped via FED EX Ground. $5.00
RV Innovations Night Owl- White Qty 2
$49.95
Shipped as a set of two lights. This part number is WHITE molded light case. This product is shipped via FED EX Ground. Shipping charges apply. $5.00
RV Innovations Night Owl- Charcoal Qty 4
$98.00
RV Innovations Night Owl- White Qty 4
$98.00
Shipped as a set of four lights. This part number is WHITE
molded light case. This product is shipped via FED EX Ground.
Shipping charges apply. $5.00
RV Innovations Awning Clamp- White
$49.95
Custom Seawall Ladder by JWP- 4 Step
$449.95
Specifications-
15 Degree Sloped Stairway Angle
Four Step Seawall Ladder- 48" Drop
Construction- Welded aluminum ladder with stainless steel
railings and hardware.
Finish- Stardust Silver powerder coat paint on aluminum,
3M anti-skid material on stair tread to prevent slipping.
Mounting Bracket- Unique mounting bracket requirs flat surface
on dock and vertical mount surface on dock face.
Six step shown in photo.
The Saint Clair require special shipping and handling due to
to its large size. Consult JWP for shipping requrements.
Six step shown in photo.
Custom Seawall Ladder by JWP- 5 Step
$499.95
Specifications-
15 Degree Sloped Stairway Angle
Five Step Seawall Ladder- 60" Drop
Construction- Welded aluminum ladder with stainless steel
railings and hardware.
Finish- Stardust Silver powerder coat paint on aluminum,
3M anti-skid material on stair tread to prevent slipping.
Mounting Bracket- Unique mounting bracket requirs flat surface
on dock and vertical mount surface on dock face.
The Saint Clair require special shipping and handling due to
to its large size. Consult JWP for shipping requrements.
Custom Seawall Ladder by JWP- 6 Step
$549.95
Specifications-
15 Degree Sloped Stairway Angle
Six Step Seawall Ladder- 60" Drop
Construction- Welded aluminum ladder with stainless steel
railings and hardware.
Finish- Stardust Silver powerder coat paint on aluminum,
3M anti-skid material on stair tread to prevent slipping.
Mounting Bracket- Unique mounting bracket requirs flat surface
on dock and vertical mount surface on dock face.
The Saint Clair require special shipping and handling due to
to its large size. Consult JWP for shipping requrements.
Starlight Smart Light- White
$80.95
Starlight Security Light- 12 volt motion sensor light
designed to automatically come on when you approach the light.
The Smart Light® can function as either a normal entryway
light, but what makes it better is that its functions
expand to include motion detection, battery low detection,
and daylight automatic shut off. To enter the motion
detection mode, the light switch is turned on, then off
then on again within 15 seconds. This action tells the
microprocessor to start working. If the light is turned
off for more then 15 seconds, it reverts to the normal
light function mode.
Price includes free shipping.
Dock/Seawall Ladder- 4 Step
$137.95
Dock/Seawall Ladder - 4 step The
"Straight Ladder" is perfect for seawalls and
stationary docks with fluctuating water levels. This dock ladder makes
climbing in and out of the water a breeze.
Details:
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum
strength and durability.
Extruded with grooves to provide
sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the industry! 14 inch diameter
hand rail, two inch tread width.
For a more comfortable dock ladder,
see the all new WIDE STEP. This dock ladder has a 4
inch wide tread width as compared to the standard 2 inch tread width.
FREE Ground Shipping on this item.
Manufactured by A1A
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal
use.
Dock/Seawall Ladder- 5 Step
$149.95
Dock/Seawall Ladder - 5 step The
"Straight Ladder" is perfect for seawalls and
stationary docks with fluctuating water levels. This dock ladder makes
climbing in and out of the water a breeze.
Details:
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum
strength and durability.
Extruded with grooves to provide
sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the industry! 14 inch diameter
hand rail, two inch tread width.
For a more comfortable dock ladder,
see the all new WIDE STEP. This dock ladder has a 4
inch wide tread width as compared to the standard 2 inch tread width.
FREE Ground Shipping on this item.
Manufactured by A1A
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal
use.
Dock/Seawall Ladder- 6 Step
$162.95
Dock/Seawall Ladder - 6 step The
"Straight Ladder" is perfect for seawalls and
stationary docks with fluctuating water levels. This dock ladder makes
climbing in and out of the water a breeze.
Details:
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum
strength and durability.
Extruded with grooves to provide
sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the industry! 14 inch diameter
hand rail, two inch tread width.
For a more comfortable dock ladder,
see the all new WIDE STEP. This dock ladder has a 4
inch wide tread width as compared to the standard 2 inch tread width.
FREE Ground Shipping on this item.
Manufactured by A1A
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal
use.
Dock/Seawall Ladder- 7 Step
$214.95
Dock/Seawall
Ladder- 7 Step
The "Straight Ladder" is perfect for seawalls and stationary docks with
fluctuting water levels. This dock ladder makes climbing in and out of
the water a breeze.
Details:
Constructed
from 6063 T5 Marine Grade Aluminum.
Tig
welding for maximum strength and durability.
Extruded
with grooves to provide sure footing and reduce slippage.
Ideal
for fresh and salt water applications. 500 lb. capacity
14
inch diameter hand rail, 2 inch wide stair tread.
For
a more comfortable dock ladder, see the all new WIDE STEP. This dock
ladder has a 4 inch wide tread width as compared to the standard 2 inch
tread width.
Shipping- Due to the extreme size of this ladder, this product must be
shipped via FREIGHT. A $20.00 shipping charge must
be added to your order.
Manufactured by A1A Accessories
See the JWPWSSL3 mounting brackets. Easily remove your ladder for
seasonal use.
SWing Ladder- 3 Step
$179.95
Aluminum Swinging Dock Ladder- 3 Step
The "Swing Ladder" by A1A has the same great dock ladder
features as the "Straight Ladder. The "Swing Ladder can be
stored and secured up and out of the water (90 degrees)
with quick release pin to retain the selected position.
This dock ladder has a fixed stainless steel bolt through
the ladder which pivots in a self lubricationg brass
bushing that is press fit into the mounting bracket.
FREE Ground Shipping on this item.
Swing Ladder- 4 Step
$189.95
Aluminum Swinging Dock Ladder- 4 Step
The "Swing Ladder" by A1A has the same great dock ladder
features as the "Straight Ladder. The "Swing Ladder can be
stored and secured up and out of the water (90 degrees)
with quick release pin to retain the selected position.
This dock ladder has a fixed stainless steel bolt through
the ladder which pivots in a self lubricationg brass
bushing that is press fit into the mounting bracket.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Swing Ladder- 5 Step
$202.95
Aluminum Swinging Dock Ladder- 5 Step
The "Swing Ladder" by A1A has the same great dock ladder
features as the "Straight Ladder. The "Swing Ladder can be
stored and secured up and out of the water (90 degrees)
with quick release pin to retain the selected position.
This dock ladder has a fixed stainless steel bolt through
the ladder which pivots in a self lubricationg brass
bushing that is press fit into the mounting bracket.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Swing Ladder- 6 Step
$212.95
Aluminum Swinging Dock Ladder- 6 Step
The "Swing Ladder" by A1A has the same great dock ladder
features as the "Straight Ladder. The "Swing Ladder can be
stored and secured up and out of the water (90 degrees)
with quick release pin to retain the selected position.
This dock ladder has a fixed stainless steel bolt through
the ladder which pivots in a self lubricationg brass
bushing that is press fit into the mounting bracket.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Swing Ladder- 7 Step
$242.95
Aluminum Swinging Dock Ladder- 7 Step
The "Swing Ladder" by A1A has the same great dock ladder
features as the "Straight Ladder. The "Swing Ladder can be
stored and secured up and out of the water (90 degrees)
with quick release pin to retain the selected position.
This dock ladder has a fixed stainless steel bolt through
the ladder which pivots in a self lubricationg brass
bushing that is press fit into the mounting bracket.
Details:
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
FREE Ground Shipping on this item. Manufactured by A1A
Wide Step Dock/Seawall Ladder- 3 Step
$173.95
A1A Wide Step 3 Step Ladder
Dock/Seawall Ladder - Other Styles Avalable, see catagories shown
in left margine.
This dock ladder had the same quality features of
the "Standard Dock Ladder". The exception is that the wide step has a 4
inch wide tread width as compared to the standard 2 inch wide tread. The
extra width of the step provides added comfort while boarding or exiting
you boat or dock. This dock ladder also reduces strain on the bottom of
your feet, extruded with grooves to provide sure footing and reduce
slippage. Ideal for fresh and salt water applications.
14 inch diameter hand rail with 4 inch wide stair tread. 12 inches rise per step.
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
For a more comfortable dock ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide tread width as
compared to the standard 2 inch tread width. FREE Ground shipping on this item.
Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily or remove
your ladder for seasonal use.
Required Hardware:
Requires 4, 1/2"
diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt
water environment).
Length of bolt will vary according to the structure
being installed on.
Bolts can be found at your local hardware store.
Accessories- See the JWPWSSL3 mounting brackets. Easily or remove
your ladder for seasonal use.
Manufactured by A1A Dock
Products. Other lengths available. Consult us by using the "Contact
Us" link shown above. Due to the length and thickness of this packaging,
this item does not qualify for FREE Ground Shipping on Wide Step Ladders
over 5' in length.
Dock/Seawall Ladder - Other Styles Avalable, see catagories shown
in left margine.
This dock ladder had the same quality features of
the "Standard Dock Ladder". The exception is that the wide step has a 4
inch wide tread width as compared to the standard 2 inch wide tread. The
extra width of the step provides added comfort while boarding or exiting
you boat or dock. This dock ladder also reduces strain on the bottom of
your feet, extruded with grooves to provide sure footing and reduce
slippage. Ideal for fresh and salt water applications.
14 inch diameter hand rail with 4 inch wide stair tread. 12 inches rise per step.
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
For a more comfortable dock ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide tread width as
compared to the standard 2 inch tread width. FREE Ground shipping on this item.
Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily or remove
your ladder for seasonal use.
Required Hardware:
Requires 4, 1/2"
diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt
water environment).
Length of bolt will vary according to the structure
being installed on.
Bolts can be found at your local hardware store.
Accessories- See the JWPWSSL3 mounting brackets. Easily or remove
your ladder for seasonal use.
Manufactured by A1A Dock
Products. Other lengths available. Consult us by using the "Contact
Us" link shown above. Due to the length and thickness of this packaging,
this item does not qualify for FREE Ground Shipping on Wide Step Ladders
over 5' in length.
Dock/Seawall Ladder - Other Styles Avalable, see catagories shown
in left margine.
This dock ladder had the same quality features of
the "Standard Dock Ladder". The exception is that the wide step has a 4
inch wide tread width as compared to the standard 2 inch wide tread. The
extra width of the step provides added comfort while boarding or exiting
you boat or dock. This dock ladder also reduces strain on the bottom of
your feet, extruded with grooves to provide sure footing and reduce
slippage. Ideal for fresh and salt water applications.
14 inch diameter hand rail with 4 inch wide stair tread. 12 inches rise per step.
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
For a more comfortable dock ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide tread width as
compared to the standard 2 inch tread width. FREE Ground shipping on this item.
Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily or remove
your ladder for seasonal use.
Required Hardware:
Requires 4, 1/2"
diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt
water environment).
Length of bolt will vary according to the structure
being installed on.
Bolts can be found at your local hardware store.
Accessories- See the JWPWSSL3 mounting brackets. Easily or remove
your ladder for seasonal use.
Manufactured by A1A Dock
Products. Other lengths available. Consult us by using the "Contact
Us" link shown above. Due to the length and thickness of this packaging,
this item does not qualify for FREE Ground Shipping on Wide Step Ladders
over 5' in length.
Wide Step Dock Ladder- 6 Step, Price Includes FREE Shipping
$259.95
A1A Wide Step 6 Step Ladder
Dock/Seawall Ladder - Other Styles Avalable, see catagories shown
in left margine.
This dock ladder had the same quality features of
the "Standard Dock Ladder". The exception is that the wide step has a 4
inch wide tread width as compared to the standard 2 inch wide tread. The
extra width of the step provides added comfort while boarding or exiting
you boat or dock. This dock ladder also reduces strain on the bottom of
your feet, extruded with grooves to provide sure footing and reduce
slippage. Ideal for fresh and salt water applications.
14 inch diameter hand rail with 4 inch wide stair tread. 12 inches rise per step.
Constructed from 6063 T5 Marine Grade Aluminum.
Tig welding for maximum strength and durability.
Extruded with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water applications.
500 lb. capacity... best in the industry!
For a more comfortable dock ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide tread width as
compared to the standard 2 inch tread width. FREE Ground shipping on this item.
Manufactured by A1A
Accessories- See the JWPWSSL3 mounting brackets. Easily or remove
your ladder for seasonal use.
Required Hardware:
Requires 4, 1/2"
diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt
water environment).
Length of bolt will vary according to the structure
being installed on.
Bolts can be found at your local hardware store.
Accessories- See the JWPWSSL3 mounting brackets. Easily or remove
your ladder for seasonal use.
Manufactured by A1A Dock
Products. Other lengths available. Consult us by using the "Contact
Us" link shown above.
The "WIDE STEPLift
Ladder" is an innovative retractable ladder with the same features as
the "Standard Lift Ladder". only 26inches from the top of
the dock to the bottom of the ladder in the lift position.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
4" wide x 15 3/8 long extruded
with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
14 inch diameter hand rail
For a more comfortable dock
ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide
tread width as compared to the standard 2 inch tread width.
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal use.
Manufactured by A1A FREE
Ground Shipping on this item.
Mounting Bracket For Hoop Sytle Ladders
$69.95
Dock/Seawall Ladder Mounting Brackets
The A1A dock ladder mounting bracket is designed for the
hoop sytle sraight and lifting ladder. This dock bracket
is designed for quick and easy release for storage or
removal for short periods of time. This bracket is
designed to work with all the hoop sytle ladders including
the new "Wide Step".
Details:
Designed for new and existing A1A Dock Ladders.
Sold as a set of 2... brackets.
To secure, slide ladder into brackets and lock with the 4 stainless steel safety pins. Release pins and slide ladder out to remove.
For existing A1A ladder owners, mounting holes for the
brackets are aligned to mount into your existing ladder
holes. Ships as bracket pairs, one for each handle.
Needed Hardware:
Requires 4, 1/2" diameter bolts (2 x 2).
Galvanized or stainless steel (stainless for salt water environment).
Length of bolt will vary according to the structure being installed on.
Bolts can be found at your local hardware store
Free Shipping when ordered with dock ladder. Manufactured
by A1A Dock Products.
Wide Step Floating Dock Lifting ladder- 4 Step
$238.95
Wide Step Lifting Ladder-
The "WIDE STEPLift
Ladder" is an innovative retractable ladder with the same features as
the "Standard Lift Ladder". only 26inches from the top of
the dock to the bottom of the ladder in the lift position.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
4" wide x 15 3/8 long extruded
with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
14 inch diameter hand rail
For a more comfortable dock
ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide
tread width as compared to the standard 2 inch tread width.
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal use.
Manufactured by A1A FREE
Ground Shipping on this item.
Wide Step Floating Dock Lift Ladder- 5 Step
$256.95
Wide Step Lifting Ladder-
The "WIDE STEPLift
Ladder" is an innovative retractable ladder with the same features as
the "Standard Lift Ladder". only 26inches from the top of
the dock to the bottom of the ladder in the lift position.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
4" wide x 15 3/8 long extruded
with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
14 inch diameter hand rail
For a more comfortable dock
ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide
tread width as compared to the standard 2 inch tread width.
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal use.
Manufactured by A1A FREE
Ground Shipping on this item.
The "WIDE STEPLift
Ladder" is an innovative retractable ladder with the same features as
the "Standard Lift Ladder". only 26inches from the top of
the dock to the bottom of the ladder in the lift position.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
4" wide x 15 3/8 long extruded
with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
14 inch diameter hand rail
For a more comfortable dock
ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide
tread width as compared to the standard 2 inch tread width.
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal use.
Manufactured by A1A FREE
Ground Shipping on this item.
Wide Step Floating Dock Lift Ladder- 7 Step, Price Includes FREE Shipping
$302.95
Wide Step Lifting Ladder-
The "WIDE STEPLift
Ladder" is an innovative retractable ladder with the same features as
the "Standard Lift Ladder". only 26inches from the top of
the dock to the bottom of the ladder in the lift position.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
4" wide x 15 3/8 long extruded
with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
14 inch diameter hand rail
For a more comfortable dock
ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide
tread width as compared to the standard 2 inch tread width.
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal use.
Manufactured by A1A FREE
Ground Shipping on this item.
Wide Step Straight Finger Pier- 3 Step
$189.95
Wide Step Lifting Ladder-
The "WIDE STEPLift
Ladder" is an innovative retractable ladder with the same features as
the "Standard Lift Ladder". only 26inches from the top of
the dock to the bottom of the ladder in the lift position.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
4" wide x 15 3/8 long extruded
with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
14 inch diameter hand rail
For a more comfortable dock
ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide
tread width as compared to the standard 2 inch tread width.
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal use.
Manufactured by A1A FREE
Ground Shipping on this item.
Wide Step Straight Finger Pier- 4 Step
$215.95
Wide Step Lifting Ladder-
The "WIDE STEPLift
Ladder" is an innovative retractable ladder with the same features as
the "Standard Lift Ladder". only 26inches from the top of
the dock to the bottom of the ladder in the lift position.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
4" wide x 15 3/8 long extruded
with grooves to provide sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
14 inch diameter hand rail
For a more comfortable dock
ladder, see the all new WIDE STEP. This dock ladder has a 4 inch wide
tread width as compared to the standard 2 inch tread width.
Accessories- See the JWPWSSL3 mounting
brackets. Easily or remove your ladder for seasonal use.
Manufactured by A1A FREE
Ground Shipping on this item.
Wide Step Finger Pier Lift- 3 Step
$219.95
Finger Pier Lifting Ladder-
The IDP "Finger Pier
Lift Ladder" is an innovative retractable ladder featuring double
groove hanger.. To extend the life of the simply pull up the lower
section above the water line to eliminate marine growth. This model has a long base, with
it's fixed portion extending 25 inches from the top of the dock.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
Extruded with grooves to provide
sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
FREE
Ground Shipping on this item. Needed
Hardware: Requires 4, 1/2" diameter bolts (2 x 2). Galvanized or
stainless steel (stainless for salt water environment). Length of bolt
will vary according to the structure being installed on. Bolts can be
found at your local hardware store.
Manufactured by International Dock Products
Wide Step Finger Pier Lift- 5 Steps
$247.95
Finger Pier Lifting Ladder-
The IDP "Finger Pier
Lift Ladder" is an innovative retractable ladder featuring double
groove hanger.. To extend the life of the simply pull up the lower
section above the water line to eliminate marine growth. This model has a long base, with
it's fixed portion extending 25 inches from the top of the dock.
Constructed from 6063 T5 Marine
Grade Aluminum.
Tig welding for maximum strength
and durability.
Extruded with grooves to provide
sure footing and reduce slippage.
Ideal for fresh and salt water
applications.
500 lb. capacity... best in the
industry!
FREE
Ground Shipping on this item. Needed
Hardware: Requires 4, 1/2" diameter bolts (2 x 2). Galvanized or
stainless steel (stainless for salt water environment). Length of bolt
will vary according to the structure being installed on. Bolts can be
found at your local hardware store.
