Aqua Pro- for 12V Batteries with
2" or Non-Standard Centers
How Does Aqua
Pro Work?
Replenishing the battery causes
the float to rise and releases the valve
from its recess. As a result, the water is able to wash around the valve
lens and
the water stream moves the valve up. Then the water pressure holds the
valve lens against the valve-sealing
ring and
keeps it closed. Order your specific kit at the bottom of this page.
Valve Seal
Valve Lense
Float Spindle
Float
CAUTION!
These
kits are designed for group 24, 27, and 31 with cell spacing that is
NOT the standard 1 5/8" center to center. This only
works on batteries with .75" press in style caps.
Aqua Pro is
manufactured in Germany by Rover and Rover. This style of
valve is available as individual valves and can be custom fit in
strings of six valve connected via clear tubing. Just insert
six valves into the battery cell hole, measure and cut clear tubing to
connect valve strings. It't that easy. This valve is designed
to press into the cell hole just like the standard cap that you would
remove.
For standard
group 24, 27, and 31 batteries with 1 5/8" cell spacing it is
recommended that you use the standard Qwik-Fill product- Link
to Qwik-Fill. However the Aqua Pro valve will work
just as well in the standard battery.
Features-
Multi
Pressure
AquaPro's shut-off valve is able to operate with the low gravity
pressure created by an elevation of 1.5 m (5 ft) all
the way through to the high pressure of 45 psi
(3 bar) - the widest range of all available fill systems in
the world!
High
Speed
AquaPro's shut-off valve has the largest water passage of all watering
systems--making it to the fastest!
Air
Immunity
AquaPro's shut-off valve is virtually immune to air in the hose system
WITHOUT PURGING!
Reliable
Function
AquaPro's shut-off valve uses the hydrodynamic and hydrostatic forces
of water, always adapting to existing pressure conditions. This makes
AquaPro® more reliable than any other
watering system.
Precise
Filling
AquaPro's shut-off valve ensures an absolutely precise electrolyte
level from the first cell to the last. Every fill cap will stop
replenishing exactly when the required electrolyte level is reached in
its cell.
Incline
Tolerance
AquaPro's shut-off valve works perfectly, even if the battery is 15
degrees out of level, because of the movable linked valve. The user
does not have to worry if the vehicle is on an incline or level.
Series
Connection AquaPro's
shut-off valve allows the fill caps to be strung together theoretically
without limitation. No parallel branches are needed.
Jan Watercraft Products
1334 Greenleaf Lane
Grand Haven,MI 49417
Jan Watercraft Products, Since 2001 Thank you for visiting our site.
If you have any questions go to our "CONTACT
US" page and send us a e-mail or call!